See this guide for more details on updating your Xbox 360.
See this guide for detailed instructions on opening your Xbox 360 case.
The four manufacturers are Lite-On, Samsung, BenQ, and Hitachi.
You will also need the firmware files for your drive. Download the iXtreme LT+ 3. 0 firmware files from the iXtreme website. JungleFlasher does not come packaged with these files for legal reasons. These firmware files change the way the Xbox 360 DVD drive functions, allowing you to install custom software. If you are flashing a Hitachi drive, you will need to download the extra iXtreme LT+ 3. 0 Hitachi files as well.
Open the PortIO folder and copy both of the files to the JungleFlasher root directory as well.
USB Connector tool (Xecuter X360USB, X360USBPro) DVD Power-to-Molex adapter (Xecuter CK3 Lite). This isn’t required if you are using the Xecuter X360USB tool, as it is already built in. If you are using the X360USBPro tool, you will need this adapter. Probe (TX CK3 PROBE 3, TX SPUTNIK360 UNLOCK PROBE, MAXIMUS 360 SCORPION TOOL V2). This is only required for the Lite-On drive. No other DVD drive requires this tool. Molex-to-outlet power connector (Molex to USB works as well)
You only need to do this for Lite-On drives. If you are using any other drive, you can skip this step.
Attach the probe piece to the small wire coming out of the probe cable. The probe should light up.
Burn the BIN file to a blank CD-R using your favorite image burning program. See this guide for more details.
This step is only required if you have a version 79 drive.
Ensure that the light on the probe is on, indicating it is receiving power.
If you were successful, look for the “Drive Properties” section of the MTK Flash 32 tab. The “Vendor” field should read “Drive in Vendor Mode”.
