Additional causes may include a damaged or missing boot.ini file or possibly a physically damaged hard drive.
Hal.dll Errors
There are a few ways the “missing or corrupt hal.dll” error may present itself, with the first listing being the most common:
Windows could not start because the following file is missing or corrupt: \system32\hal. dll. Please re-install a copy of the above file. \System32\Hal. dll missing or corrupt: Please re-install a copy of the above file. Cannot find \Windows\System32\hal. dllCannot find hal. dll
The “missing or corrupt” error displays shortly after the computer is first started. Windows hasn’t yet fully loaded when this message appears.
How to Fix Missing Hal.dll Errors
Below are several possible fixes to try. Work through this list in the order they’re presented here, which is from the easier to the more difficult solutions.
Restart your computer. It’s possible that the error could be a fluke. Since hal. dll errors appear before Windows is fully loaded, it’s not possible to properly restart your computer. Instead, you’ll need to force a restart. You can do that by pressing or holding down the physical power button until the computer shuts down; press it once to start it back up. Check for proper boot order in BIOS. You might see the error if the boot order in BIOS is first looking at a hard drive other than your main hard drive. The error appears because the other drive doesn’t have a file called hal. dll. This is likely the problem if you recently changed the boot order or flashed your BIOS. Run System Restore from a Command Prompt. If this doesn’t work, or you’re receiving the error message before you’re able to complete this process, move on to the next step. Repair or replace the boot. ini file. This will work if the cause of the problem is actually the boot. ini file and not hal. dll, which is often times the case. If repairing boot. ini does correct the issue but the problem reappears after a reboot and you’ve recently installed Internet Explorer 8 in Windows XP, uninstall IE8. In this specific situation, IE could be the root cause of your hal. dll problem. Write a new partition boot sector to the system partition. If the boot sector has become corrupt or isn’t properly configured, you may receive the hal. dll error. Recover data from any bad sectors on your hard drive. If the physical part of your drive that stores any part of the hal. dll file has been damaged, you’re likely to see errors like this. Restore the hal. dll file from the Windows XP CD. If the DLL file is truly the cause of the problem, restoring it from the original Windows XP CD may do the trick. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this doesn’t resolve the issue. Perform a clean installation of Windows XP. This type of installation will completely remove Windows from your PC and install it again from scratch. While this will almost certainly resolve any hal. dll errors, it is a time-consuming process due to the fact that all your data must be backed up and then later restored. If you can’t gain access to your files to back them up, you should understand that you will lose them all if you continue with a clean installation. Test the hard drive. If all else has failed, including the clean installation from the last step, you’re most likely facing a hardware issue with your hard drive, but you’ll want to test it to be sure. If the drive fails any of your tests, replace the hard drive and then complete a new installation of Windows.
Need More Help?
If you’re not interested in fixing this problem yourself, see How Do I Get My Computer Fixed? for a full list of your support options, plus help with everything along the way like figuring out repair costs, getting your files off, choosing a repair service, and a lot more.
